Axle Seals in Transaxle
#31
That's what I did in my case; i.e., I just replaced the outer seal. Note, I had to buy an aftermarket seal at RockAuto because although I dug around and found the GM part number for just the outer seal (#24201936), GM doesn't sell just the seal. Instead, they sell the seal kit, which also comes with the stub shaft portion (kit is around $30 (whoa!)). I didn't need the latter, so I instead shopped for just the aftermarket outer seal on RockAuto and paid just under $10. It installed perfectly.
National Transmission Seal
5.0 (1)Write a review Part Number: 5693Warranty: 3 years
Overnight and Two Day shipping are not available for PO Box, APO/FPO/DPO or US Territory addresses.
$15.99
Ship to Home
Store Pick Up
(Visit Store to Order)
FREE Next Day
(Next day delivery date is based on daily order cut off time of Midnight CST, product, and availability.)
Ship to Home
Store Pick Up
(Visit Store to Order)
FREE Next Day
(Next day delivery date is based on daily order cut off time of Midnight CST, product, and availability.)
Last edited by RJ_RS_SS_350; 04-03-2019 at 05:02 PM.
#33
#34
Ding, ding! Looks like that's the same as mine. I also have the 4T45E. Thus, the Advanced Auto part looks like it should work. Note again though, you can buy just the outer seal at RockAuto for less money.
If you intend to replace the stub shaft sleeve/seal, I think you'll need to get the special tool. But honestly, I've never replaced the stub shaft sleeve/seal, so I can't say if there's a workaround to avoid buying the special tool.
If you intend to replace the stub shaft sleeve/seal, I think you'll need to get the special tool. But honestly, I've never replaced the stub shaft sleeve/seal, so I can't say if there's a workaround to avoid buying the special tool.
Thread
Thread Starter
Forum
Replies
Last Post
Lone Ranger
Problems/Service/Repairs
12
07-29-2008 09:09 PM
Lone Ranger
General HHR
2
06-15-2008 09:29 PM