Panel rear doors
08-27-2012, 07:14 PM
#11
Senior Member
Join Date: 10-09-2010
Location: Indy
Posts: 454
I have the same problem on the drivers side rear door.
I put a shim washer on the B pillar, but it was not any help,so I guess I need to pull of the door panel and shim the two bolts on the door https://www.chevyhhr.net/forums/show...p?p=345279#186
I put a shim washer on the B pillar, but it was not any help,so I guess I need to pull of the door panel and shim the two bolts on the door https://www.chevyhhr.net/forums/show...p?p=345279#186
09-05-2012, 10:17 AM
#12
New Member
Thread Starter
Join Date: 07-24-2012
Location: Roswell, NM
Posts: 13
This is common apparently. Mine would do the same thing. I could hear the actuator but no open door for a few pushes of the button. I found that if I keep the seals lubricated with dielectric grease it is no longer a problem. The seals get sticky here in Texas from the heat and the grease prevents this from happening. The dielectric grease also keeps the seals from drying out.
09-10-2012, 11:50 PM
#16
Platinum Member
Join Date: 01-09-2007
Location: SE USA
Posts: 15,880
Thread
Thread Starter
Forum
Replies
Last Post