Remote Start distance ?
#22
@Ogre Ralf, if you’re still in need of assistance with the location of the receiver please, send me a private message with the VIN of your HHR. I would be happy to look into this for you.
Michelle, Chevrolet Customer Service
Michelle, Chevrolet Customer Service
#23
Why would it necessary to know the VIN in order to research the location of the receiver? The module that contains the receiver is located on the seat back cushion latch bracket which is behind the left rear quarter lower trim panel. You have to remove the rear seat to get to it. If you replace the module, the new one has to be programmed.
#24
Nope
The receiver for the FOB and TPMS is indeed located above the headliner near the center rearview mirror. db/sb's location/directions is for the OnStar/cellular receiver.
#25
Nope back at you.....
No....db/sb's location/directions are for the RCDLR (remote control door lock receiver)....I really wasn't sure which receiver Ogre Ralf was referring to. I know this thread was initially about auto start but when he awakened it I thought he was talking about locks. I may have been mistaken.......
#27
Oh Well
No....db/sb's location/directions are for the RCDLR (remote control door lock receiver)....I really wasn't sure which receiver Ogre Ralf was referring to. I know this thread was initially about auto start but when he awakened it I thought he was talking about locks. I may have been mistaken.......
#28
From the 2006 manual:
Remote Control Door Lock Receiver
Procedure
•The module is secured to the seat back cushion latch bracket with three integral tabs, pull away from the bracket to remove.
•Disconnect the electrical connector.
•Reprogram the remote control door lock module after installation. Refer to Control Module References .
Procedure
•The module is secured to the seat back cushion latch bracket with three integral tabs, pull away from the bracket to remove.
•Disconnect the electrical connector.
•Reprogram the remote control door lock module after installation. Refer to Control Module References .
Remote Control Door Lock Receiver
Procedure
•Disconnect the electrical connector.
•Unsnap the receiver from the roof front header panel.
Procedure
•Disconnect the electrical connector.
•Unsnap the receiver from the roof front header panel.
#29
db/sb,
You are 100% correct for the question asked. Ogre Ralf's vehicle from post #13 is a 2006.
According to my search of the online owners manuals TPMS seems to have started with the 2008MY, perhaps that is when the change occurred.
We both learned something today.
You are 100% correct for the question asked. Ogre Ralf's vehicle from post #13 is a 2006.
According to my search of the online owners manuals TPMS seems to have started with the 2008MY, perhaps that is when the change occurred.
We both learned something today.
Last edited by Sno White; 12-13-2012 at 08:03 PM. Reason: 's
#30
Why would it necessary to know the VIN in order to research the location of the receiver? The module that contains the receiver is located on the seat back cushion latch bracket which is behind the left rear quarter lower trim panel. You have to remove the rear seat to get to it. If you replace the module, the new one has to be programmed.
2006-2007
2008-2011
Thread
Thread Starter
Forum
Replies
Last Post
HillsdaleHHR
Problems/Service/Repairs
4
02-21-2009 02:26 PM