Tires & Wheels Tire and Wheel discussions. What Fits, Show Tires, Custom Wheels

Mixing Five Spoke and Standard?

Old Oct 22, 2011 | 09:27 PM
  #1  
jmdomini's Avatar
Thread Starter
New Member
 
Joined: 09-08-2011
Posts: 16
From: Sycamore,IL
Angry Mixing Five Spoke and Standard?

Got new tires on my HHR today and in the process learned that I have two bent wheels. They are out of balance and can not be repaired, for now they put them on the back.

So, I'm going to be needing some replacement wheels. I currently have the 16" five spoke OEM steel wheels. At the moment looking to go the least expensive route for replacements. I see that the standard steel wheels are quite a bit cheaper than the five spoke. Other than needing to get some different wheel covers, is there any technical reason that they couldn't be used in combination with the five spoke? Would there be any problem with fitting the TPMS sensors to these wheels?

Thanks!
Old Oct 22, 2011 | 10:07 PM
  #2  
Greybeard999's Avatar
Senior Member
 
Joined: 03-06-2010
Posts: 6,869
From: Ohio
You should be fine if you keep them in pairs, front and back. Doesn't matter which is which but you don't want to have one style on the drivers side and one on the passenger side. The reason I say this is because there is more than likely a weight difference.... I think all other specs are the same (width, offset, etc. etc.)
Old Oct 22, 2011 | 10:40 PM
  #3  
sleeper's Avatar
Platinum Member
 
Joined: 01-09-2007
Posts: 16,081
From: SE USA
Look in the classifieds here. There usually are some for sale cheep..
Old Oct 23, 2011 | 09:29 PM
  #4  
jmdomini's Avatar
Thread Starter
New Member
 
Joined: 09-08-2011
Posts: 16
From: Sycamore,IL
Thanks for the replies. Looks like LKQ may have two of the five spoke wheels in stock for $105. I guess that's not too bad if they actually have them. If all else fails Tirerack.com has some after market 16" steel wheels for $54 each. Hmm, I can get four NEW wheels for almost the price of two used ones.

I don't know if they are junk for that price. Not that I'm impressed with the quality of the OEM wheels at the moment.
Old Oct 23, 2011 | 09:39 PM
  #5  
badassbowtie's Avatar
Senior Member
 
Joined: 02-19-2010
Posts: 1,529
From: Buffalo ny
there is 2 different single wheel listings on ebay....both under $100
Old Oct 24, 2011 | 07:08 PM
  #6  
jmdomini's Avatar
Thread Starter
New Member
 
Joined: 09-08-2011
Posts: 16
From: Sycamore,IL
Found two on EBay with a little creative searching for $100 each with free shipping from Mobile, AL. Fingers crossed that they are in as good of condition as described and as pictured when they arrive.

Best price I could find locally was $135 each plus tax.
Old Oct 24, 2011 | 08:00 PM
  #7  
badassbowtie's Avatar
Senior Member
 
Joined: 02-19-2010
Posts: 1,529
From: Buffalo ny
Originally Posted by jmdomini
Found two on EBay with a little creative searching for $100 each with free shipping from Mobile, AL. Fingers crossed that they are in as good of condition as described and as pictured when they arrive.

Best price I could find locally was $135 each plus tax.

Good luck!!! ebay has never done me wrong
Old Oct 24, 2011 | 10:13 PM
  #8  
mongo's Avatar
Senior Member
 
Joined: 06-21-2008
Posts: 1,458
From: SE Michigan
IMO the stock wheels are about the weakest steel wheels I have ever seen. I bought a 'warranty' on them when I bought the car, as of now I do not have any of the wheels the car was delivered with.


The Euromax's are becoming leakers due to the bad chrome, I may be wheel shopping in the spring.
Old Oct 29, 2011 | 01:26 PM
  #9  
jmdomini's Avatar
Thread Starter
New Member
 
Joined: 09-08-2011
Posts: 16
From: Sycamore,IL
Smile

Received the replacement wheels on Thursday. They needed a good scrub down, but otherwise at least visually appeared to be in good condition. I wanted to reserve judgement until they were installed and it was confirmed there were no problems. Got them installed this morning and all is well!
Old Oct 29, 2011 | 01:52 PM
  #10  
Greybeard999's Avatar
Senior Member
 
Joined: 03-06-2010
Posts: 6,869
From: Ohio
Glad you got it sorted out....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
solman98
Brakes | Suspension | Shocks | Struts
147
Sep 24, 2025 02:06 PM
nyghtfalcon
Tires & Wheels
6
Apr 19, 2015 07:51 PM
Toddolie
HHR SS
23
Aug 21, 2009 08:52 PM
urbexHHR
Fuel Economy - Hypermiling
7
Apr 28, 2009 01:11 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:21 AM.