3rd Brake Light Mod Step by Step
#42
This is a very easy mod that gets complicated by the stupid pins in the plastic cover around the brake light. Pull hard but carefully! I had someone help me out and ended up tearing the clip from the plastic. Grrrrr.
I put "Disturbed" because a friend of mine insists I am. Can't let them down. LOL! I got mine from Vinz Decals - it's the type that you have to stick to the light itself not the rear window. I'm in Florida and I've had it for several months now, so far so good, hasn't come off.
I put "Disturbed" because a friend of mine insists I am. Can't let them down. LOL! I got mine from Vinz Decals - it's the type that you have to stick to the light itself not the rear window. I'm in Florida and I've had it for several months now, so far so good, hasn't come off.
#45
#46
I got my "HHR" brake light cover today and installed it. Mine adhered to the window and the 2 bolts are 9/32 in size. Unfortunately I broke one of the tabs on the cover while pulling it off. Other than that, it looks great. I am waiting on my other little gizmo that will make the 3rd light blink 7 times and then stay on steady. It's about the size of a quarter and will fit perfectly behind the cover.
#48
You can buy black "sticky" letters at just about any teacher's store or maybe office supply store. They are pretty cheap. This will work now that we know they have to be 1 1/4 inch high.
After I was happy with where they were, I would put a coat of Future (aka Klear) over them to seal. Let dry before re-installing of course. Overnight would probably be enough. It works well as a light duty sealer and is water soluble until it dries. I have heard of people using Future as a floor wax. Imagine that!
#49
Thread
Thread Starter
Forum
Replies
Last Post
NxlKing2304
"How To" Tutorial Library
66
03-01-2016 07:49 AM
Louvit
Appearance/Modifications Discussions
2
06-02-2008 06:12 PM